3.
Disconnect the stop lamp switch connector (A).
LHD
RHD
Remove the crash pad lower panel. (Refer to the Body group- crash pad).
Remove the junction box. (Refer to the Body Electrical System group-Fuses and Relays) [RHD Only]
Disconnect the stop lamp switch connector (A).
LHD
RHD
Remove the mounting bracket bolts (B).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the snap pin (A) and clevis pin (B).
LHD
RHD
Remove the brake pedal member assembly mounting nuts and then remove the brake pedal assembly.
Tightening torque:
12.7 ~15.7 N.m (1.3 ~1.6 kgf.m, 9.4 ~11.6 lb-ft)
LHD
RHD
