Check for resistance between No.3 and No.4 terminals in each switch position.
Switch | Connector terminal | Resistance (±1%) |
VOLUME DOWN | 3-4 | 6.81 kΩ |
VOLUME UP | 3-4 | 4.61 kΩ |
MUTE | 3-4 | 3.11 kΩ |
MODE | 3-4 | 2.11 kΩ |
SEEK DOWN | 3-4 | 1.11 kΩ |
SEEK UP | 3-4 | 430 Ω |
Remove the driver airbag module.
(Refer to RT group - "Airbag module")
Remove the steering wheel.
(Refer to ST group - "Steering column and shaft")
Remove the steering wheel cover (A) after loosening the screws.
Disconnect the audio remote control switch connector (A).
Remove the audio remote control switch (A).
Install the audio remote control switch on the steering wheel.
Install the steering wheel.
Reconnect the audio remote control switch connector and airbag connectors.
Make sure that the switch connector is plugged in properly.
Install the driver airbag module.
