Check the handsfree remote control switch for resistance between No.3 and No.4 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) | Output voltage (±0.16V) |
Call | 3 - 4 (Right) | 40.91 kΩ | 2.96V |
Hang up | 3 - 4 (Right) | 18.91 kΩ | 2.64V |
Switch | Connector terminal | Resistance (±5%) | Output voltage (±0.22V) |
Voice | 1 - 3 (Left) | 10.71 kΩ | 2.29V |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module")
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft")
Remove the steering wheel rear cover (A) after loosening the screws.
Remove the handsfree remote switch (A) after loosening the screws.
Install the handsfree remote switch to the steering wheel bezel.
Install the steering wheel and bezel.
Reconnect the handsfree remote control switch connector and airbag connectors.
Make sure that the switch connector is plugged in properly.
Install the driver airbag module.
