1.
Remove the center bearing bracket (A) mounting bolts (B).
Tightening torque :
39.2~49.0N.m(4.0~5.0Kgf.m, 28.9~36.1lb.ft)
Remove the center bearing bracket (A) mounting bolts (B).
Tightening torque :
39.2~49.0N.m(4.0~5.0Kgf.m, 28.9~36.1lb.ft)
After making a match mark(C) on the rubber coupling(A) and rear differential companion(B), remove the rear propeller shaft mounting bolts(D).
Tightening torque :
49.0~68.6N.m(5.0~7.0Kgf.m, 36.1~50.6lb.ft)
After making a match mark(C) on the flange yoke(A) and transaxle companion(B), remove the front propeller shaft mounting bolts(D).
Tightening torque :
49.0~68.6N.m(5.0~7.0Kgf.m, 36.1~50.6lb.ft)
Use the hexagonal wrench to prevent damage of bolt head when removing bolts(D).
Installation is the reverse of the removal procedures.
