1.
Installation is the reverse of removal.
note
●
Grease the drive gear of the differential carrier assembly.
High pressure grease:
KLUBER MICROLUBE GNY 202 or equivalent
GREASE-TRANSMISSION (MS511-55, TMG-2)
●
Spread sealant on the matching face of coupling & differential carrier.
Sealant material
FIPG(Formed in Place Gaskets)-B (MS721-40) or equivalent to LT5702
●
Remove oil on the matching face before spread sealant.
●
Refer to instruction drawing for spreading line.
●
Staring point anding point should be overlapped (min.10mm(0.3937in.))
●
Be sure to assemble part "Coupling & Differential carrier" within 3 minutes after spread sealant.
