1.
Remove the seat back cover (A).
(Refer to BD group - "Front seat")
Remove the seat back cover (A).
(Refer to BD group - "Front seat")
Remove the blower fan (A) after removing the screws from the seat back.
Remove the seat cushion (A).
(Refer to BD group - "Front seat")
Remove the blower fan (A) after removing the rivets from the seat cushion.
Install the blower fan.
Install the seat back and cushion.
Attach the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3.
Check that the fan motor operates.
Pin | Description |
1 | 12V |
2 | RPM control |
3 | GND |
If the fan motor fails to operate, replace it.
