Remove the crash pad lower panel. (Refer to the Body group-crash pad)

Remove the IPM. (Refer to the Body Electrical System group - Fuses and Relays)

Disconnect the parking brake switch connector (A).

RHD

Remove the parking brake pedal mounting bolts and nut.

LHD

RHD

Remove the parking brake cable fixing clips (B, C), and then disconnect the cable from the parking brake pedal.

Raise the vehicle, and make sure it is securely supported.

Remove the parking brake cable (B) after removing the clip (A).

Loosen the parking brake cable bracket bolts and remove the parking brake cable.

Remove the floor console. (Refer to the Body group - Console)

Loosen the adjusting nut (A) and the parking brake cables.

Disconnect the connector (A) of parking brake switch.

Remove the parking brake lever assembly after removing the 4 bolts as shown below.

Raise the vehicle and make sure it is securely supported.

Remove the parking brake cable (B) after removing the clip (A).

Loosen the parking brake cable braket bolts and remove the parking brake cable.

Raise the vehicle, and make sure it is securely supported.

Remove the rear tire and wheel.

Remove the rear brake caliper and Rear disc brake.

(Refer to "Rear disc brake removal")

Remove the parking brake cable (B), after removing the clip (A).

Remove the shoe hold down pin (A) and the spring (B) by pressing and rotating the spring.

Remove the adjuster assembly (D) and the lower return spring (C).

Remove the upper return spring (E) and the brake shoes (F).

Remove the operating lever assembly (G).