1.
Disconnect the back up lamp switch connector(A).
Park the vehicle on a level ground and stop the engine.
Remove the oil filler plug and washer. Inspect the manual transaxle fluid condition and quantity.
If the manual transaxle fluid is contaminated, drain it out by removing the oil drain plug.
Tighten the new oil drain plug with a new washerand fill manual transaxle fluid to a proper level.
Tightening torque :
58.9~78.5N.m(6.0~8.0kgf.m, 43.4~57.9lb-ft)
Oil type: SAE75W/85
Oil quantity: 1.6ℓ (1.7 US qt, 1.41 lmp qt)
Retighten the oil filler plug with a new washer.
Tightening torque :
58.9~78.5N.m(6.0~8.0kgf.m, 43.4~57.9lb-ft)
Disconnect the back up lamp switch connector(A).
Inspect the continuity of the switch. When the shift lever is located in reverse range, it should be applied an electric current, resulting in turning on the back up lights.
Replace the back up lamp switch, if necessary.
Tightening torque :
29.4~34.4N.m(3.0~3.5kgf.m, 21.7~25.3lb-ft)
