2.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
Loosen the drain plug, and drain the engine coolant.
Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
Remove the water pump pulley (A).
Remove the water pump (A) and gasket (B).
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring and hoses to avoid misconnection.
Disconnect the battery negative cable from the trunk.
Loosen the drain plug and drain the engine coolant.
Remove the radiator upper hose (A) and lower hose (B).
Disconnect the WTS & gauge unit connector (A)
Disconnect the throttle body coolant hoses (A) and the heater hoses (B).
Remove the water temperature control assembly (A).
