Component Inspection
■ Check PCSV
1.

IG "OFF". Disconnect PCSV connector.

2.

Measure resistance between power and control terminals of PCSV connector.(Component side)

Specification : 22.0 ~ 26.0Ω [20℃(68℉)]

3.

Is the measured siganl waveform normal?

▶ Substitute with a known - good PCM and check for proper operation. If the problem is corrected, replace PCM and go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known - good PCSV and check for proper operation. If the problem is corrected, replace PCSV and go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика