The TPMS Module monitors the RF signals from the sensors. If no valid RF signal is received from a sensor, this DTC is set. Due to TPMS Module Internal faults, if TPMS Module could not receive any signals of sensor (included with all TPMS sensor), this DTC is set too.
Item | Detecting Condition | Possible cause |
DTC strategy |
•
Monitoring RF signals | 1. Damaged TPMS Module(RF receiver circuit) 2. TPMS sensor which is not fitted in the vehicle specifications |
Enable conditions |
•
IG ON | |
Threshold value |
•
No valid RF data is received over 540 seconds(9 minutes) consecutive from any sensor and RF receiver is not reponding | |
TPMS Lamp |
•
Lamp on (60s flashing and ON) |
