Connect GDS to Data Link Connector. (DLC)

Engine "ON".

Confirm the AFLS ECU type and then download to correct parameter.

* REFERENCE*

Perform the initializing after replace "AFLS ECU"

* Vehicle condition*

1) Park at lever land

2) Vehicle speed ≤ 5km/h

3) Engine r.p.m > 500rpm

4) Connect GDS

5) CAN communication is normal status

6) Battery voltage > 10.5V

7) Headlamp S/W ON, AFLS ON

① Parameter Download

② Calibration

③ Clear "DTC"

④ Confirm the Headlamp movement through the Actuation Test

Fig.1) Parameter Download 1

Fig.2) Parameter Download 2

Fig.3) Completed Parameter Download

Fig.4) Calibration

Fig.5) Completed Calibration

Fig.6) Actuation Test

⑤ Confirm the "DTC" and "Service data"

Is parameter displayed within specifications ?

	▶ Go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known - good AFLS ECU and check for proper operation. If the problem is corrected, replace AFLS ECU and go to "Verification of Vehicle Repair" procedure.