1.
Check status
(1)
IGN "ON" & Engine "OFF"
(2)
Monitor the "ECM Status" Parameter on the ""Current Data"" with GDS.
Specification : 'LEARNT'
Fig.1) This data show that 2 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.
(3)
Has the "Smartra STATUS" been learnt ?
 | ▶ Fault is intermittent caused by poor contact in the PCM/ECM or SMARTRA connector or was repaired and PCM/ECM memory was not cleared. Throughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage.Repair or replace as necessary and go to "Verification Vehicle Repair" procedure |
 | ▶ Go to "Component Inspection" Procedure. |
