As a result of LDWS calibration, if the reference point was found but it is out of a normal range, the LDWS ECU sets this DTC.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
LDWS Reference Point Monitoring | 1. Wrong setting up for LDWS Calibration board 2. Wrong setting up for LDWS |
Enable Condition |
•
During LDWS Reference Point Calibration | |
Threshold value |
•
After having done LDWS Reference Point Calibration, the appropriate reference point is not found | |
Detecting time |
•
Immediately |
