BSD monitors angle signal correction value read calculated by internal processor. During the auto calibration operating, BSD sets this code when abnormal angle signal value is detected from the BSD(Main ECU RH).
The LDWS ECU sets this DTC and makes a warning lamp turn off. BSD system is prohibited.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Checking a power supply voltage | 1. BSD INSTALLATION ANGLE Failure |
Enable Conditions |
•
IG ON | |
Detecting time |
•
Immediately | |
Threshold value |
•
WHEN SENSOR INSTALLATION ANGLE IS OUT OF SPECIFICATION RANGE (CORRECTION ANGLE : SPECIFICATION RANGE PLUS OR MINUS 5 DGREE) |
