BSD ECU sets this code when the messages Between BSD ECU(LH) from BSD ECU(RH) line can not read to send messages or error within the last 500msec.
This code is set, and the BSD Switch LED functions are prohibited and system is down
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
BSD (RH LH) ECU | 1. Poor connection 2. Open or short in CAN communication line 3. BSD ECU(RH / LH) Communication Module. |
Enable Conditions |
•
IG ON ( BSD Switch ON )
•
Vehicle speed is over 4 Mile/h(7 Km/h) | |
Threshold value |
•
It can't get some data from BSD ECU(LH <-> RH) | |
Detecting time |
•
0.5 second |
