B2630 is outputted when the number of deployment/non-deployment is more than 3 times while "ACTIVE HOOD LIFT ACTUATOR LH/RH"s "FIRE" message counter is calculated. This code is not erased by GDS, replace AHS CM.
※ The actuator's "FIRE" message counter is calculated based on the number of AHS CM's order. It is calculated on the actuator's fire counter even if the actuator is not deployed because of malfunction.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Internally count the number of LH/RH actuator driving | 1. Exceeding the number of LH actuator’s limited operation cycle (3cycles) 2. Exceeding the number of RH actuator’s limited operation cycle (3cycles) | |
Enable Conditions |
•
Actuator drives (Including "actuator test") | ||
Threshold Value | Case1 |
•
LH actuator's fire counter has more than 3cycles | |
Case2 |
•
RH actuator's fire counter has more than 3cycles | ||
Diagnostic Time |
•
When event occurs | ||
Fail-safe |
•
AHS operates normally | ||
Cancellation | Active DTC |
•
Cannot be erased by GDS | |
History DTC |
•
Cannot be erased by GDS | ||
