8556322

1.

IG "OFF".

2.

IG "ON".

3.

Connect GDS and select "Diagnostic Trouble Codes(DTCs)" mode.

4.

Using a GDS, Clear DTC.

5.

Using a GDS, Check DTC present.

6.

Are any DTCs present ?

▶ Substitute with a known-good G-sensor and check for proper operation. If problem is corrected, replace G-sensor and then go to "Verification of Vehicle Repair" procedure.

※ In a case of replacing the G-sensor, operate "longitudinal G sensor Calibration" by GDS.

▶ This fault is intermittently caused by poor connection of the G-Sensor. Go to "Verification of Vehicle Repair" procedure.