IG ON, ENG OFF.

Stand the vehicle on a flat ground without any inclination.

Set the steering wheel at the center position.

Keep the vehicle under normal tire pressure condition and normal loading condition.

Connect GDS to Data Link Connector(DLC).

Perform Longitudinal G Sensor Calibration in Vehicle S/W Management menu of the GDS. (Fig.1)

Is "Longitudinal sensor's calibration" completed normally ?

	▶ Go to "Verification of Vehicle Repair" procedure.
	▶ Fault is intermittent caused by poor connection in IMU(SRSCM) harness or faulty IMU(SRSCM). Go to "Verification of Vehicle Repair" procedure.