BSD ECU sets this code when the messages between BSD ECU from ABS/ESP ECU received abnormal yaw rate signal within the last 500msec.
This code is set, and the BSD Switch LED functions are prohibited and system is down
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
ABS/ESP CAN Signal Check | 1. Poor connection 2. Open or short in CAN communication line 3. Yaw rate Sensor 4. ABS/ESP |
Enable Conditions |
•
IG ON ( BSD Switch ON )
•
Vehicle speed is over 4 Mile/h(7 Km/h) | |
Threshold value |
•
When it has gotten abnormal signals from YAW RATE. | |
Detecting time |
•
500ms (0.5 second) |
