The TPMS Module sets this DTC when there is Wheel pulse CAN signal error for 10 second.
Item | Detecting Condition | Possible cause |
DTC strategy |
•
CAN Signal Check | 1. Open or short in TPMS Module communication line 2. Faulty wheel Speed Sensor |
Enable conditions |
•
IG ON | |
Threshold value |
•
During Auto Location, if the signal of ABS(ESP,ESC) wheel pulse fault is received more than 10 seconds and Auto-location fails, this DTC is set. | |
TPMS Lamp |
•
Lamp on (60s flashing and ON) |
