3.
Monitor the BATTERY VOLTAGE parameter on the "Current Data" With GDS.
Connect GDS to Data Link Connector(DLC).
IGN "ON"
Monitor the BATTERY VOLTAGE parameter on the "Current Data" With GDS.
Is the displayed current data normal?
 | ▶ Fault is intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and BSD ECU memory is not cleared yet. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage. ▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to " Inspection/Repair " procedure. |
