PCM monitors output signal from APS 2, if output signal is below the threshold, the PCM sets a P2127 DTC.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
This code detects a continuous short to ground or open in either the circuit or the sensor (0-100%) | 1. Poor connection 2. Open or short to ground in power circuit 3. Open or short to ground in signal circuit 4. Faulty APS 5. Faulty PCM |
Enable Conditions |
•
Ignition "ON" | |
Threshold value |
•
APS2 less than 0.125V | |
Diagnosis Time |
•
Continuous | |
MIL On Condition |
•
1 Driving Cycle |
