PCM monitors output signals from CKPS every 7.8 seconds, if an output signal is missing or redundant for more than 1.56 seconds then, the PCM sets a P0336 DTC.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Detecting extra/missing pulses between consecutive 58X reference pulses | 1. Poor connection 2. Noise 3. Short in harness 4. Target wheel 5. PCM |
Enable Conditions |
•
Engine running state | |
Threshold value |
•
Extra / missing pulses greater than 2 pulses | |
Diagnosis Time |
•
Continuous (More than 1.56 sec.failure for every 7.8 sec.test) | |
MIL On Condition |
•
3 Driving Cycles |
