If power management mode is recognized, the PCM sets a P2110 DTC.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
This code detects if the system is in Power Management Mode | 1. TPS Malfunction 2. TPS Malfunction + MAFSMalfunction 3. MAP Malfunction + TPS Malfunction 4. Faulty PCM |
Enable Conditions |
•
Ignition On | |
Threshold value |
•
Power Management Mode is active | |
Diagnosis Time |
•
- | |
MIL On Condition |
•
1 driving Cycle |
※ If the Main relay is inoperable, the following DTCs can set:
<DTC Name>
- P0638 Throttle Actuator Control Range/Performance(Bank 1)
- P0685 PCM/PCM Power Relay Control Circuit /Open
- P1295 Throttle Actuator Control System - Power Management
- P2106 Throttle Actuator Control System - Forced Limited Power
