P0098 is set when the voltage above 4965mV - maximum output voltage of IATS(between BPS and intercooler) - is detected for more than 2.0 sec.. This code is due to 1) open or 2)short to battery in IATS signal circuit
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring | 1. IATS #2 Circuit problem 2. Faulty IATS #2 | ||
Enable Conditions |
•
IG key ON | |||
Threshold Value |
•
Voltage is over maximum value (4965mV).
•
Open in signal circuit.
•
Short to battery in signal circuit | |||
Diagnostic Time |
•
2 sec. | |||
Fail Safe | Fuel cut | NO |
•
Fixed at 28℃. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | OFF | |||
