P0108 is set when the voltage above 4.85V - maximum output voltage of Barometric pressure sensor - is detected for more than 0.8 sec. This code is due to fee failure of the sensor inside of ECM.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring | 1. Atmospheric pressure sensor (ECM component) | ||
Enable Conditions |
•
Engine running | |||
Threshold Value |
•
When output voltage is above the maximum value (above 4.85V). | |||
Diagnostic Time |
•
0.8 sec. | |||
Fail Safe | Fuel cut | NO |
•
Regarding pressure as 1000hpa when failure | |
EGR Off | YES | |||
Fuel Limit | YES | |||
MIL | ON | |||
