P0113 is set when the voltage above 3200 mV - maximum output voltage of IATS - is detected for more than 1 sec. This code is due to 1) open or 2) short to battery in IATS signal circuit.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring | 1. IATS #1 circuit 2. IATS #1 | ||
Enable Conditions |
•
IG key ON | |||
Threshold Value |
•
When output signal is above the maximum value. (above 3200 mV) - Open in signal circuit. - Short to battery in signal circuit. | |||
Diagnostic Time |
•
1 sec. | |||
Fail Safe | Fuel cut | NO |
•
Fixed at 50℃. | |
EGR Off | YES | |||
Fuel Limit | YES | |||
Check Lamp | ON | |||
