P0118 is set when the voltage above 4.85V - maximum output voltage of Barometric pressure sensor - is detected for more than 0.8 sec. This code is due to fee failure of the sensor inside of ECM.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage Monitoring |
•
ECTS circuit
•
ECTS | ||
Enable Conditions |
•
IG key ON | |||
Threshold value |
•
Output voltage is higher than maximum value (3255mV). | |||
Diagnosis Time |
•
2 sec. | |||
Fail Safe | Fuel cut | NO |
•
Engine Hot condition : Fixed at 80℃
•
Engine cold/cranking : Fixed at -10℃ | |
EGR Off | NO | |||
Fuel Limit | NO | |||
MIL | OFF | |||
