Checking output signals of BPS every 5 sec. under detecting condition, if an output signal is below 0.125V for more than 0.8 sec., PCM sets P2228.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring | 1. ECU | ||
Enable Conditions |
•
IG key ON | |||
Threshold value |
•
Output voltage < 0.2V | |||
Diagnosis Time |
•
800ms | |||
Fail Safe | Fuel cut | NO |
•
- | |
EGR Off | YES | |||
Fuel Limit | YES | |||
Check Lamp | ON | |||
