2.
Push the lock pin (B), then remove the tweeter speaker connector (C).
When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Using a screwdriver, remove the quadrant inner cover (A).
Push the lock pin (B), then remove the tweeter speaker connector (C).
After disconnecting the connector (A), then remove the outside rear view mirror (B).
Tightening torque :
6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)
Install in the reverse order of removal.
Push the inside rear view mirror base (A) up to remove the inside rear view mirror assembly (C).
Install in the reverse order of removal.
Remove the ECM mirror cover (A).
Disconnect the ECM mirror connector (B).
Loosen the ECM mirror mounting screw.
Push the ECM mirror base up to remove the ECM mirror assembly (A).
Install in the reverse order of removal.
Make sure the connector is connected properly.
