1.
Loosen the radiator upper cover mounting bolts and clips.
Pry the trim off using a plastic trim tool and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
Loosen the radiator upper cover mounting bolts and clips.
Loosen the front bumper lower mounting clips.
After loosening the front bumper side's mounting screw, then disconnect the side's.
Disconnect the fog lamp connector (A) and front bumper main connector (B).
[LH]
[RH]
Remove the front bumper cover (A).
Install in the reverse order of removal.
Make sure the connector is connected properly.
Replace any damaged clips.
