3.
After loosening the mounting bolt, then remove the front seat belt lower anchor (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first.
Front door scuff trim.
Rear door scuff trim.
Remove the front seat belt lower anchor cover (A).
After loosening the mounting bolt, then remove the front seat belt lower anchor (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Using a screwdriver or remover, remove the center pillar lower trim (A).
After loosening the mounting bolt, then remove the center pillar upper trim (B).
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolts, then remove the front seat belt pretensioner (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Make sure the connector is connected properly.
Replace any damaged clips.
Remove the front seat belt upper anchor.
After loosening the mounting bolts, then remove the height adjust (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
Remove the front seat assembly.
Disconnect the front seat belt buckle connector wiring (A).
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
