4.
Remove the luggage box trim (A).
When installing the belt, make sure not to damaged the retractor.
Remove the second row seat assembly.
Remove the third row seat assembly.
Remove the rear door scuff trim.
Remove the luggage box trim (A).
Remove the luggage box partition trim (A).
After loosening the mounting screws, then remove the rear transverse trim (A).
After loosening the mounting bolt, then remove the second row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
After loosening the mounting bolt, then remove the third row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After loosening the mounting screws, then remove the luggage side trim (A).
After loosening the mounting bolt, then remove the C pillar trim (A).
After loosening the mounting bolt, then remove the second row seat belt upper anchor (A).
After loosening the mounting bolt, then remove the second row seat belt retractor (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace ant damaged clips.
Remove the second row seat back cover [LH].
Loosen the second row center seat belt lower anchor mounting bolt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
After loosening the mounting nut (B), then remove the second row center seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
Remove the second row seat assembly [LH].
After loosening the mounting bolt (A), then remove the second row seat belt buckle [LH] (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Fold the second row seat assembly [RH] (A).
Pull up the second row seat assembly [RH] (A) as far as possible.
Loosen the second center seat belt buckle mounting bolt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Remove the second row center seat belt buckle (A).
Install in the reverse order of removal.
Remove the second row seat assembly [RH].
After loosening the mounting nut, then remove the second row seat belt buckle [RH] (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Remove the second row seat assembly.
Remove the third row seat assembly.
Remove the rear door scuff trim.
Remove the luggage box trim (A).
Remove the luggage box partition trim (A).
After loosening the mounting screws, then remove the rear transverse trim (A).
After loosening the mounting bolt, then remove the second row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
After loosening the mounting bolt, then remove the third row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
After loosening the mounting screws, then remove the luggage side trim (A).
After loosening the mounting bolt, then remove the rear pillar trim (A).
After loosening the mounting bolt, then remove the third row seat belt upper anchor (A).
After loosening the mounting bolt, then remove the webbing guide (B).
After loosening the mounting bolt, then remove the third row seat belt retractor (C).
Tightening torque :
39.2~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
Remove the third row seat assembly.
After loosening the mounting bolt, then remove the third row seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
