2.
Remove the clip (A) and then remove the shift & select cable from the shift lever assembly.
Remove the floor console assembly.
(Refer to Body - " Floor Console")
Remove the clip (A) and then remove the shift & select cable from the shift lever assembly.
Remove the cable guide (A) from lever assembly.
Remove the retainer (A) after loosen the nut.
Tightening torque :
11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.8 lb-ft)
Air cleaner assembly
(Refer to Engine Mechanical System - "Air Cleaner")
Battery and battery tray
(Refer to Engine Electrical System - "Battery")
Remove the shift & select cable.
Remove the pin (A) and washer (B).
Make unlock clip (B) and then remove the shift & select cable (C) and clip from the bracket (A).
Do not reuse the clip (B).
Remove the shift cable into the cabin room side.
