Removel
2WD
1.

Remove the rear wheel and tire (A) from rear hub .

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

caution

Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.

Support the rear lower arm (A) with a jack as shown in the illustration.

note

Certainly install Jack as being danger because of the tension.

3.

Loosen the bolt (A-1ea) and then remove the rear shock absorber cover (B).

Tightening torque:

5.9 ~ 9.8 N.m (0.6 ~ 1.0 kgf.m, 4.3 ~ 7.2 lb-ft)

4.

Remove the rear wheel guard.

(Refer to Body (Interior and Exterior) - "Rear Wheel Guard")

5.

Loosen the bolt (A,B) & nut (C) and then remove the rear shock absorber bracket (D).

Tightening torque:

Bolts :

(A) 137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

(B) 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

Nuts :

(C) 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

6.

Loosen the nut (A) and then remove the rear shock absorber (B).

Tightening torque:

137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

4WD
7.

Remove the rear wheel and tire (A) from rear hub .

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

caution

Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

8.

Support the rear lower arm (A) with a jack as shown in the illustration.

note

Risk due to the spring tension to Honor Jack definitely fixed.

9.

Loosen the bolt (A-1ea) and then remove the rear shock absorber cover (B).

Tightening torque:

5.9 ~ 9.8 N.m (0.6 ~ 1.0 kgf.m, 4.3 ~ 7.2 lb-ft)

10.

Loosen the bolt (A) & nut (B) and then remove the rear shock absorber (C).

Tightening torque:

Bolt (A) : 137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Nut (B) : 137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Inspection
1.

Check the rubber parts for damage or deterioration.

2.

Check the shock absorber for abnormal resistance or unusual sounds.

Яндекс.Метрика