1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
caution
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Remove the rear wheel and tire (A) from rear hub .
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Support the rear lower arm (A) with a jack as shown in the illustration.
Certainly install Jack as being danger because of the tension.
Loosen the bolt & nut and then remove the rear lower arm (A) with the rear axle.
Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
Loosen the bolt & nut and then remove the rear lower arm (B) with the sub frame (A).
Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
Installation is the reverse of removal.
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
Check the bushing for wear and deterioration.
Check the rear lower arm for deformation.
