Inspection
1.

Check for resistance between No.2 and No.7 terminals in each switch position.

[Audio System]

Switch

Connector

terminal

Resistance

(±1%)

Volume Down

2-7

6.81 kΩ

Volume Up

2-7

4.61 kΩ

MUTE

2-7

3.11 kΩ

Mode

2-7

2.11 kΩ

Seek Down

2-7

1.11 kΩ

Seek Up

2-7

430 Ω

Removal
1.

Remove the driver airbag module.

(Refer to Restraint - "Airbag module")

2.

Remove the steering wheel front cover (A) after loosening the screws.

3.

Disconnect the audio remote control switch connector (A).

4.

Remove the audio remote control switch (A).

Installation
1.

Install the audio remote control switch on the steering wheel front cover.

2.

Install the steering wheel front cover.

3.

Reconnect the audio remote control switch connector and airbag connectors.

note

Make sure that the switch connector is plugged in properly.

4.

Install the driver airbag module.

Яндекс.Метрика