With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multifunction switch.

Disconnect the negative (-) battery terminal.

Remove the front tire wheel guard.

(Refer to Body - "Front bumper")

Disconnect the fog lamp connector (A).

Turn the bulb socket counterclockwise and then remove the fog lamp bulb (A).

If it is necessary to replace the lamp assembly, remove the fog lamp (A) after loosening the screws.

Disconnect the negative (-) battery terminal.

Remove the front tire wheel guard.

(Refer to Body - "Front bumper")

Disconnect the cornering lamp connector (A).

Turn the bulb socket counterclockwise and then remove the fog lamp bulb (A).

Install the front fog lamp bulb.

Connect the fog lamp connector.

Install the front tire wheel guard.

Install the cornering lamp bulb.

Connect the cornering lamp connector.

Install the front tire wheel guard.