2.
Remove the steering column upper and lower shrouds (A) after loosening 3 screws.
Disconnect the negative (-) battery terminal.
Remove the steering column upper and lower shrouds (A) after loosening 3 screws.
Remove the wiper switch (A) with pushing the lock pin (C) after disconnecting the connector (B).
Install the windshield wiper switch.
Connect the wiper switch connector.
Install the steering column upper and lower shrouds.
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.
Disconnect the negative(-) battery terminal.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
Remove the side garnish (A) after loosening the screws.
Remove the head lamp washer switch (A).
Make sure that the continuity exists between the terminals as below. If it is not normal condition, replace the head lamp washer switch
