2.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Remove the rear wheel ＆ tire.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).
Use a SST (09581-11000) when installing the brake caliper assembly.
Place the caliper body (A) on the caliper carrier and tighten the guide rod bolts (B).
Tightening torque:
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
Install the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
