3.
Disconnect the clutch switch connector (A) and ignition lock switch connector (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Pannel")
Disconnect the clutch switch connector (A) and ignition lock switch connector (B).
Loosen the clutch pedal mounting nuts (C) and bolt (D).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Separate the push rod (A) from the clutch pedal assembly after remove the pin and washer.
Remove the clutch pedal after loosening the bolts (A).
Install in the reverse order of removal.
