3.
Disconnect the clutch switch connector (A) and ignition lock switch connector (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Pannel")
Disconnect the clutch switch connector (A) and ignition lock switch connector (B).
Loosen the clutch pedal mounting nuts (C) and bolt (D).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Separate the push rod (A) from the clutch pedal assembly after remove the pin and washer.
Remove the clutch pedal after loosening the bolts (A).
