Removal
1.

Turn the ignition switch off and disconnect the battery nagative (-) cable.

2.

Remove the air cleaner.

(Rerfer to Engine Mechanical System - "Air Cleaner")

3.

Disconnect the low pressure fuel line quick-connector (A) connected to the engine.

4.

Disconnect the low pressure fuel line quick-connector (B) connected to the fuel filter.

5.

Lift the vehilcle.

6.

Remove the fuel tank.

(Refer to Fuel delivery system - "Fuel Tank")

7.

Remove the fuel line fixing bracket (A).

8.

Remove the fuel line fixing bracket (A) and the fuel line protector (B) by unscrewing the bolt.

9.

Remove the fuel line fixing bracket (A) under the engine room.

10.

Remove the fuel line by pulling it carefully not to damage it at the floor.

Installation
1.

Install in the reverse order of removal.

caution

After removing or replacing the part below, bleed air in low pressure fuel circuit.

-

Fuel Tank

-

Low Pressure Fuel Pump

-

Fuel Filter

-

High Pressure Fuel Pump

-

Low Pressure Fuel Lines

Яндекс.Метрика