13521352

1.

Connect the negative(-) battery cable.

2.

Perform "ECM Change" procedure [With CPF].

(1)

Turn ignition switch OFF.

(2)

Connect the GDS to Data Link Connector (DLC).

(3)

Turn ignition switch ON.

(4)

Select "Vehicle, Model year, Engine, System".

(5)

Select "Vehicle S/W Management".

(6)

Select "Component Change Routine".

(7)

Select "ECU Change".

(8)

Input the mileage in odometer.

(9)

Confirm the "Complete" message and then turn ignition switch OFF.

(10)

Wait for more than 10 seconds, and then turn ignition switch ON.

3.

Perform "Injector Specific Data Input" procedure.

(Refer to Engine Control/Fuel System - "Injector")

4.

Perform "Key Teaching" procedure.

(Refer to Body Electrical System - "Immobilizer")