2.
Install the jack to the edge of the upper oil pan to support the engine.
note
Insert the rubber block between jack and upper oil pan.
Disconnect the battery "-" terminal.
Install the jack to the edge of the upper oil pan to support the engine.
Insert the rubber block between jack and upper oil pan.
Disconnect the engine earth cable, and then remove the engine mounting support bracket (A).
Tightening torque
Bolts (B) & Nut (C):
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Nut (D):
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Remove the engine mounting bracket (A).
Tightening torque :
63.7 ~ 83.3 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~ 61.5 lb-ft)
Install in the reverse order of removal.
Remove the roll road bracket(A).
Tightening torque
Bolt (B) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
Bolt (C) :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
Install in the reverse order of removal.
Disconnect the earth cable (A).
Install the jack to the transaxle lower.
Insert the rubber block between jack and transaxle for the transxle protect form damage.
Remove the srvice cover (A).
Remove the transaxle mounting fixing bolt (A).
Tightening torque:
88.4 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 Ib-ft)
Remove the transaxle mounting bracket(A).
Tightening torque :
63.7 ~ 83.3 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~ 61.5 lb-ft)
Install in the reverse order of removal.
