13521898

Apply liquid gasket evenly on the mating surface of timing chain cover.

note

●

Standard liquid gasket : LOCTITE 5900H or equivalent

●

Check that the mating surfaces are clean and dry before applying liquid gasket.

●

Install the timing chain cover in 5 minutes after applying the liquid gasket.

●

Apply liquid gasket in a 3 mm (0.12 in) wide bead without stopping.

●

Remove hardened sealant located on the front between the bock and head.

●

Apply liquid gasket in a 4 mm (0.16 in) wide bead by a “Z” shape on the T-joint.

●

Apply liquid gasket on the front between the bock and head.

Install the timing chain cover (A).

Tightening torque

Bolts (B) :

19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft)

Bolts (C, D) :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

note

●

Check the unevenness between the timing chain cover and cylinder head.

Unevenness : 0.20 mm (0.0079 in) or less

●

The engine running or pressure test should not be performed within 30 minutes after the timing chain cover is assembled.