3.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the cylinder head cover.
Use fender covers to avoid damaging painted surfaces.
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring and hoses to avoid misconnection.
Disconnect the battery negative terminal.
Remove the engine cover.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the cylinder head cover.
Disconnect the breather hose (A).
Disconnect the fuel hose quick connectors (A).
Remove the injectors (A), the high pressure fuel pipes (B), the injector return line (C).
(Refer to Engine Control/Fuel System - "Injector")
Remove the fuel hose bracket (D) and the function block (E).
Remove the EGR solenoid valve (F) and vacuum pipe & hose (G). (Euro-4/5 only)
Remove the oil level gauge (A).
Remove the cylinder head cover (A).
Unfasten the cylinder head cover bolts in the sequence shown.
