Select a piston cooling oil jet using the selection chart.
If the parts is not matched, it may cause of engine adhere due to insufficient oil pressure.
Selection Chart For Piston Cooling Oil Jet and Balance shaft & Oil Pump Module
BSM type
α (Cap color : Yellow) | β (Cap color : Black) |
 |  |
Piston cooling oil jet type
A (Cap color : None) | B (Cap color : Orange) |
 |  |
Install the piston cooling oil jets (A).
Tightening torque :
8.8 ~ 12.7 N.m (0.9 ~ 1.3 kgf.m, 6.5 ~ 9.4 lb-ft)
Assemblel the other parts in the reverse order of disassembly.
In case the cylinder block is replaced with a new one, select the proper crankshaft main bearing and the piston according to the crankshaft journal bore mark and the cylinder bore mark on the cylinder block.
Crankshaft main bearing selection
(Refer to Cylinder Block - "Crankshaft")
Piston selection
(Refer to Cylinder Block - "Piston and Connecting Rod")
