5.
Remove the air intake shield (A).
Drain the coolant.
(Refer to Cooling System - "Coolant")
Remove the air duct.
(Refer to Intake And Exhaust System - "Air cleaner”)
Remove the battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
Remove the air intake shield (A).
Disconnect the radiator upper hose (A).
Disconnect the radiator lower hose (A).
Remove the ATF cooler hose. (AT only)
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Disconnect the fan motor connector (A).
Disconnect the overflow hose (A).
Remove the A/C pipe bracket fixing bolt (A).
Remove the air guard (A) and then remove the A/C condenser (B) from the radiator assembly.
Remove the radiator upper mounting bracket (A) andthen lift up the radiator.
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the upper air guard (A) on the radiator assembly.
Tightening torque:
2.8 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.1 ~ 2.4 lb-ft)
Remove the cooling fan (A) from the radiator.
Tightening torque :
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Fill the radiator with coolant.
(Refer to Cooling System - "Coolant")
Start engine and check for leaks.
